It’s only a matter of time before you soil your carpet or rug. Without proper action, it could leave a permanent mark.
Getting permanent marks out requires more than a bit of elbow grease. You need a strategy or you might end up making things worse.
Don’t worry, below are some carpet stain removers you can use for easy removal of tough stains.
Continue reading to learn more about how to get stains out of carpet.
Have a Carpet Stain Remover
To properly know how to get stains out of carpets, you have to know what type of carpet you have. There are two types:
- Natural-fiber carpets
- Synthetic carpets
Natural-fiber carpets have an authentic natural weave with rich textures. Some common types are wool, seagrass, coir, jute, and sisal. Synthetic carpets include Nylon, Polyester, Olefin, and Triexta.
Detergent Solution
Mix 1/4 teaspoon of a translucent liquid dishwashing detergent into warm water. You can use the solution on both synthetic and natural-fiber carpets.
Vinegar Solution
Add a cup of white vinegar with two cups of warm water. If you have a natural-fiber carpet, mix 1/4 cup of white vinegar with 1/4 cup of warm water. Apply the solution and let it absorb into the carpet before washing.
Solvent Solution
For the solvent solution, use an oil solvent like nail polish remover. Mix a tablespoon with a cup of warm water then apply it to the carpet.
Ammonia Solution
This solvent solution is only for removing dirt from natural-fiber carpets. Mix a tablespoon of clear household ammonia with 1/2 cup of lukewarm water. If you don’t have any of the solutions, it’s time to find the best carpet cleaner you can.
How to Get Stains Out of Carpet
Use any of the carpet stain removers on any stain from liquid to solid stains. Here are a few, simple steps on how to get stains out of carpets.
Remove Any Excess
Start by removing any dirt, debris, or liquid as much as possible. Vacuum any dry and crumbly material. Scrape away anything sticky with a popsicle stick or butter knife.
Remember, never rub the cloth to remove carpet stains. It could damage the carpet fibers and remove any natural color. Removing instead to prevent pressing any dirt further into the carpet.
Apply the Carpet Stain Remover
Spray the remaining stains with the carpet stain remover. Avoid using bleach unless you have a pure white carpet. Make sure not to spray too much since it can damage the backing.
Let the solution soak into the stain for 10 minutes. Wipe it away and let it dry for a minute. If you still see a stain, spray it with the solution again and let it soak for at least 15 minutes.
Blot the Stain Away
Blot the carpet from the outside in with a clean, absorbent cloth. Repeat the process until the stain no longer transfers to the cloth. Be sure to blot with cold water, then use another cloth to blot dry.
Cover the damp area with a layer of cloth or paper towels. Weigh them down with heavy objects and let it stay for 10 minutes. You can also air-dry the carpet outside for one hour.
Never Leave a Carpet Stained
Cleaning your carpet from stains and dirt can prevent molds from growing. Now that you know how to get stains out of carpet, start cleaning those annoying carpet stains.
Of course, keeping your home clean and pretty doesn’t end here. If you want to discover even more tips, feel free to read our other home and lifestyle guides today!
